T60 Clip Girder Fixing 75mm to 150mm Flange (per 2)

Designed to clamp to any I beam flange between 75mm and 150mm wide while providing a secure suspension point for the T60 curtain track via an M10 stud (sold separately).

T60 Clip Tube Fixing 38mm Barrel (per 2)

Used to suspend track at any horizontal angle below a suitable pipe with a diameter of 38mm. Allows track height adjustment when stud lengths of greater than 150mm are used.

T60 Clip Tube Fixing 48mm Barrel (per 2)

Used to suspend track at any horizontal angle below a suitable pipe with a diameter of 48mm. Allows track height adjustment when stud lengths of greater than 150mm are used.

T60 Clip Tube Fixing 60mm Barrel (per 2)

Used to suspend track at any horizontal angle below a suitable pipe with a diameter of 60mm. Allows track height adjustment when stud lengths of greater than 150mm are used.

T60 Coachscrew (per 6)

Bright zinc plated coach screws, packed in sixes for use when T60 universals are required to bolt directly to timber joists.

T60 Deadline Suspension Fitting (per 2)

For use when you need to attach a cable suspension point directly to your track.

T60 Stud With 4 Nuts & Washers M10 x 150mm (per 2)

M10 x 150mm self colour stud bolt supplied with 4 nuts & washers. For use with various Hall Stage T60 track fixings.

T60 Universal Fitting (per 2)

The T60 Universal Clamp is used to suspend track for direct fixing to a soffit, timber joist or ceiling via a 10mm Coach Screw or M10 Rawl Bolt, or will accept an M10 stud for connection to most other T60 fixing units.