T70 Pulley Cable Head

Designed to hold tension in cable operated T70 curtain tracks. Suitable for end of track fixing applications only. Can be used on any electrically or winch operated T70 curtain track.

T70 Roller Curved Double

Used on T70 overlapped curved threaded curtain tracks to hold the hauling line in place while still allowing the master carrier to pass. Contact us with any diversion requirements on any operation of track.

T70 Pulley Curved Guide (per 2)

T70 guide pulleys are used on all treaded curves to direct the free line (outside the track) around a curve.

T70 Pulley Return

To be located at the far end of your T70 curtain track, used to turn the hauling line through 180 degrees and send it back to your head pulley. Used on all threaded T70 curtain tracks. Suitable for track fixing only.

T70 Pulley Handline Head

Designed to divert the lines down at the end of the T70 curtain track to a suitable floor fixing or weighted floor pulley.

T70 Pulley Weighted Floor

Designed to hold tension in rope operated T70 curtain tracks. To be used in conjunction with a T70 Hand Line Head Pulley.

T70 Pulley Floor Fixing

Designed to hold tension in rope operated T70 curtain tracks. Suitable for floor fixing only. To be used in conjunction with a T70 Hand Line Head Pulley.

T70 Roller Curved Single (per 2)

Used on T70 single and overlapped curved threaded curtain tracks to hold the hauling line in place while still allowing the master carrier to pass. Contact us with any diversion requirements on any operation of track.

T70 Pulley Cable Head Wall Fixing

Designed to hold tension in cable operated T70 curtain tracks. Suitable for wall fixing applications only where the cable head pulley is facing the track. Can be used on any electrically or winch operated T70 curtain track.

T70 Pulley Upstage Off Side Of Track Unsprung

Used when you need to divert your hauling cables upstage directly off of the side of your track. If using this pulley on an electric or winch operated track you will need to introduce a cable head pulley further down the line to ensure tension is held in your hauling line. Track mounting only.

T70 Pulley Cable Head Through Wall

Designed to hold tension in cable operated T70 curtain tracks. Suitable for wall fixing applications only where the cable head pulley is facing away from the track through an adjacent wall. Can be used on any electrically or winch operated T70 curtain track.

T70 Pulley Support (per 2)

A track fixing guide pulley attached to long straight runs of corded cable track to hold cable sag out of the reach of the curtains. The pulleys are used to support the free line (outside the track).